Jurek PURSEAL Adhesive

Special polyurethane adhesive PURSEAL 15g,

Suitable for impermeable sealing of smaller holes by "dripping".

For tents, raincoats, backpacks, covers, clothes and mats.

Instructions for Use:

The glue is applied, preferably on the cleaned surface with a coating (usually the inner side of the part with seams gluing, matt patch surface, etc.) by applying to both glued surfaces in a thin layer directly from the tube or using a spatula or brush. Then let it settle for 3-5 minutes.

Note: If the surface is very absorbent, use more glue, resp. repeat another layer of glue.

Then join the bonded surfaces and load for at least 1 hour. The joint reaches full strength after 24 hours.

Smaller holes can be sealed by "dripping" only with glue alone.