|No. of entrances:||1|
|No. of persons:||2 - 3|
|Total weight:||3,6 kg|
|Packed size:||d.20x42 cm|
|Seasonal use:||all year|
|Floor water column:||15000 mm|
|Flysheet water column:||10000 mm|
|Weight class:||3,51-4 kg|
Single-entrance double-wall dome tent with rectangular floor-plan. It is suitable for all kinds of tourism and frequent use. The inner tent and flysheet are set up together at once. It can be used also during winter. For this purpose, we recommend sewing "snow flaps" at the edge of the flysheet.
The inner tent is sewn with the floor and hung on the inner face of the flysheet. It is possible to set up the flysheet and inner tent separately. At the top of the inner tent, there is a vent covered by dense mosquito-net. For more intense ventilation and protection against small insects, the entrance through the inner tent contains the dense mosquito-net as well.
The flysheet is hung on the frame poles using tunnels and at the bottom fastened to the ends of the poles. The flysheet is prolonged in front of the inner tent to make a large vestibule suitable for storage and cooking (with caution). The flysheet has fixing points at edges and in the centers of the flysheet walls. There are two air vents at the top of the flysheet.
There is a 6 cm gap between the inner tent and the flysheet. The gap improves thermal comfort, ventilation and reduces condensation. The size of the gap can be adjusted by loosening or tightening of the inner tent ropes.
Number of poles crossings: 1x
The tent consists of:
tent pegs: 14 pcs
alu pole Ø 9,5 mm: 2 pcs
guy line long (2m): 8 pcs
guy line short (1 m): 5 pcs
repair kit (self-adhesive patch & 12 cm Alu repair tube).