We (this web site operator, JUREK S+R s.r.o. with the registered office at 73913 Kunčice pod Ondřejníkem c. p. 766, CZ, ID No: 25855972, as a personal data manager) use cookies required for the functioning of the website, for analytical purposes on this website. By using our web you agree with saving cookies on your computer / device. Settings of cookies may be changed in the settings of your browser.

Contacts

JUREK S+R s.r.o.
č. p. 766
73913 Kunčice pod Ondřejníkem
phone: +420 556 850 032
fax: +420 595 175 026
radim@jurek.cz
JUREK shop in KpO č. p. 766, Tuesdays 7–17 h
Wed–Fri 7–15h, Saturdays 5.10.,19.10. - 8:30–11:30

Goods in action

Our price 950.00 CZK (37.12 EUR)
Our price 945.00 CZK (36.93 EUR)

Best sellers

Our price 1,440.00 CZK (56.27 EUR)
Our price 2,880.00 CZK (112.54 EUR)
Our price 1,215.00 CZK (47.48 EUR)


Trek building instructions

TREK single entrance tent building instructions

  1. Unfold the tent (the inner tent is suspended on flysheet) with the floor to the ground (you can pin it with four pegs to the ground to facilitate the construction in windy weather).
  2. Unfold the duralumin poles (check that the individual segments have snapped into the couplings) and push them through sleeves into the inner eyelets at oppsite corners of the floor.
  3. Triangles on the elastics at the corners of the flysheet can be attached by pulling the protruding ends of the poles.
  4. Tighten the flysheet and vestibule at the bottom edge, either by the triangles (rings) so that the flysheet edges are adjamcet to the ground (in cold weather), or by using short lines to pull the bottom flysheet to increase air intake (hot and humid days).
  5. Tighten the longer walls of the flysheet using pegs (or larger stones) and longer a guylines at the center sides.
  6. Use pegs pins in the handles of the floor to anchor the flyshhet. Use long guylines wich are caught by the edge handles if neccesary. It will also stabilizes the construction (in this case it is neccesary that the Velcro on the inside under the handle is attached to the construction.

The tent can also be built separately.

  • The inner tent has sewn sutures for individual hanging behind the poles of the structure.
  • To build the tropics you need a supplement no.1 which you can buy.


TREK DUO double entrance tent building instructions

  1. Unfold the tent (the inner tent is suspended on flysheet) with the floor to the ground (you can pin it with four pegs to the ground to facilitate the construction in windy weather).
  2. Unfold the duralumin poles (check that the individual segments have snapped into the couplings) and push them through sleeves into the inner eyelets at oppsite corners of the floor.
  3. Triangles on the elastics at the corners of the flysheet can be attached by pulling the protruding ends of the poles.
  4. Tighten the flysheet and vestibule at the bottom edge, either by the triangles (rings) so that the flysheet edges are adjamcet to the ground (in cold weather), or by using short lines to pull the bottom flysheet to increase air intake (hot and humid days).
  5. Tighten the longer walls of the flysheet using pegs (or larger stones) and longer a guylines at the center sides.
  6. Use pegs pins in the handles of the floor to anchor the flyshhet. Use long guylines wich are caught by the edge handles if neccesary. It will also stabilizes the construction (in this case it is neccesary that the Velcro on the inside under the handle is attached to the construction.

The tent can also be built separately.

  • The inner tent has sewn sutures for individual hanging behind the poles of the structure.
  • To build the tropics you need a supplement no.1 which you can buy.

 

Y2VhNjk